Wiring & Rewiring in Ocala, FL
Fixed pricing in writing, permits pulled with the job, and a real person on the line for the calls that can’t wait.
How much does it cost to rewire a house in Ocala, FL?
A full home rewire typically runs $8,000 to $25,000 or more in Ocala, depending on square footage, how much drywall has to open and close, and how easy the attic or crawl space access is.
A single new circuit is a much smaller project, usually $250 to $750, and aluminum wiring can sometimes be remediated at the connection points instead of fully replaced, which changes the math significantly.
Why Knob-and-Tube and Aluminum Wiring Come Up So Often
Knob-and-tube wiring, common in homes built before the 1950s, has no ground wire and its porcelain insulators crack with age. A growing number of insurers won't write a policy on a home that still has it, regardless of whether it's currently working fine.
Aluminum branch wiring, common from roughly 1965 to 1973 during a copper price spike, carries a different risk: aluminum oxidizes and expands and contracts more than copper at outlet and switch connections, and a 2011 CPSC-cited study found aluminum-wired homes were 55 times more likely to reach fire-hazard conditions at those connections than copper-wired homes.
Neither means the house is unsafe to live in today. It means the wiring is a known, documented risk profile that a lender, insurer, or future buyer is going to ask about eventually. Better to control the timing than have it control you.
What's Included
- Whole-house rewireEvery circuit replaced room by room, coordinated with drywall patching so you're not without walls for weeks.
- Single new circuitFor an addition, a dedicated appliance circuit, or a room that's overloaded on a shared circuit.
- Aluminum wiring remediationCopper pigtail connections (AlumiConn or COPALUM) at outlets and switches, or full replacement depending on scope and budget.
- Knob-and-tube removalFull replacement with modern grounded wiring, generally required rather than remediated.
- Drywall coordinationCut lines planned to minimize patching, and a list of exactly what needs repair when the electrical work is done.
Signs You Need This
- You have visible knob-and-tube wiringCeramic knobs and tubes visible in an attic or basement. Check before your insurer finds it first.
- Outlets or switch plates are marked with an 'AL'A sign of aluminum branch wiring, common in homes built roughly 1965 to 1973.
- Your insurer flagged the wiring at renewalA common trigger for scheduling a rewire or remediation rather than a routine one.
- Frequent nuisance trips with no clear causeAging wiring can present this way even when no single fault is obvious.
How a Rewire Project Works
- 01
Assessment and estimate
The electrician walks the accessible wiring, sizes the scope, and gives a written estimate: full rewire or targeted remediation.
Time on site: 1–2 hours
- 02
Permit filed
Required for any rewire before work starts, filed as part of the job.
Time on site: before work begins
- 03
Wiring replaced room by room
New circuits run and old wiring removed in phases, coordinated so parts of the house stay livable.
Time on site: days 1 through most of the job
- 04
Rough-in inspection
Inspector reviews wiring before walls close back up. This step can't be skipped.
Time on site: scheduled mid-project
- 05
Drywall patch and final inspection
Patching coordinated (by the electrician's team or your contractor) and a final inspection closes out the permit.
Time on site: final days
Where you landA fully documented, permitted, inspected electrical system, and a real answer the next time an insurer or buyer asks about the wiring.
Permits, Inspections and Timeline
A rewire always requires a permit, with a rough-in inspection before walls close and a final inspection at completion. This isn't optional and isn't something to skip to save time. Expect the inspection steps to add real days to the calendar depending on how busy the local building department is.
Wiring & Rewiring Cost in Ocala, FL
USD
- Whole-house rewire$8,000–$25,000+per homeScales with square footage, number of circuits, and how much drywall has to open and close.
- New dedicated circuit$250–$750per circuitDepends on run length and whether the panel has open breaker space.
- Aluminum wiring remediation (pigtail method)$50–$150per connectionAddresses the connection points, not the wire runs themselves: a targeted, lower-cost option.
- Knob-and-tube removal (partial)$2,500–$8,000+per projectPriced by circuit count and how many rooms are affected.
These are typical ranges for Ocala metro; your exact price is confirmed in writing after the on-site assessment.
Insurance sometimes requires full replacement rather than remediation on aluminum wiring. Check with your carrier before committing to the smaller scope.
Full Rewire vs. Targeted Remediation
Compared onUpfront costScope of protectionTimelineInsurance acceptance
Full rewire
$8,000–$25,000+
Best forKnob-and-tube wiring, or aluminum wiring with a wider budget and a resale or insurance deadline
- Addresses every run, not just the connections
- Resets the clock on the whole electrical system
- Usually the most straightforward answer for insurers
- Highest cost of the two options
- More disruption: drywall, dust, days without full power in some rooms
Targeted aluminum remediation
Best forAluminum-wired homes where the budget or timeline doesn't support a full rewire
- Much lower cost
- Addresses the actual failure point (the connections), not the wire itself
- Minimal disruption compared to a rewire
- Doesn't apply to knob-and-tube, which generally needs full replacement
- Some insurers still want full replacement regardless
Knob-and-tube wiring should be fully replaced, not remediated. Aluminum wiring can often be remediated at the connections for a fraction of the cost of a full rewire, but confirm your insurer will accept that scope before you commit to it, since a few carriers require full replacement regardless.
Wiring & Rewiring in Ocala, FL — questions
It lacks a ground wire and its insulators crack with age, which raises fire risk over time. A growing number of insurers won't write a policy on a home that still has it. Whether it's dangerous today depends on its condition, but it's a known enough risk that most electricians recommend full replacement.
Usually yes, in phases. Most whole-house rewires are done room by room or floor by floor so parts of the house keep power while others don't. A short outage is normal on the day the new panel connection swaps over.
It varies with the house. Homes with an accessible attic and basement need far less drywall opened than a home with finished ceilings on every floor. Your electrician should walk you through the expected cut lines before work starts, not after.
Remediating the connections (a copper pigtail method) addresses the actual failure point for a fraction of a full rewire's cost, and it's accepted by many insurers. Some carriers still require full replacement, so check your policy before choosing the smaller scope.
Most whole-house rewires run one to three weeks depending on square footage, access, and how quickly the permit inspections get scheduled. The inspection steps, not the wiring itself, are usually what sets the pace.
$250 to $750 in Ocala, depending mainly on how far the new circuit has to run and whether there's open breaker space in the panel already.
Licensed, insured electrical repair, panel upgrades and installs for Ocala and Marion County.
- 01Licensed & insuredEvery job is performed by a licensed, insured electrician working to Florida electrical code.
- 02Fixed written pricingYou see the number before any tool touches your panel. The quote doesn't move once work starts.
- 03Permits handledThe permit gets pulled and the inspection gets scheduled as part of the job, not a form you're left to chase.
- 0424/7 emergency lineSparking outlets, burning smells and total power loss get a same-day or overnight response.
Get a fast, flat quote
Tell us what's going on and we'll call back with a real arrival window, not a vague callback promise.
Let’s put it in writing.
A one-visit assessment is enough to scope the project and give you a real number, whether it's one new circuit or a whole-house rewire.